This post contains Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases.
The Baby Ripple Crochet Blanket is a cozy, beginner-friendly project with a gently wavy shape and a soft, plush feel. Its ripple pattern comes from simple single crochet stitches and carefully placed increases and skips, making it a relaxing choice for a baby shower gift, a nursery blanket, or a quiet evening of crocheting.
Why you’ll love this pattern
This blanket uses just one stitch, single crochet, so you can focus on building a steady rhythm rather than learning complicated techniques. The repeating ripple is satisfying to watch take shape, and the bulky blanket yarn gives the fabric a soft, cushioned texture.
It’s also a thoughtful handmade gift for a new baby. The pattern works in one piece, without joining panels, and the two suggested colors offer either a warm pink look or a cool seaside feel.
“The ripple was easy to get into a rhythm with, and I loved seeing the waves appear as the blanket grew. The plush yarn made it especially cozy.”
Before you begin
You’ll make a single-piece baby blanket in rows. The first row establishes the ripple, and the following rows repeat the same pattern, worked into the back loops only. Single crochet stitches form the straight parts of each wave; increases and skipped stitches create the peaks and valleys.
The pattern is approachable for a beginner who knows how to chain and single crochet. Take extra care with the stitch placement at the ripple points, especially while learning the repeat. The finished length is 42 in. (106.5 cm); the pattern does not specify the finished width.
Materials you’ll need
- Bernat® Baby Blanket™ Frosting™ yarn: Cozy Rosie (61001) or Seaside (61004), 2 balls, or 440 yds/402 m total. Each ball is 10.5 oz/300 g and 220 yds/201 m.
- Crochet hook: U.S. L/11 (8 mm), or the size needed to obtain gauge.
- Susan Bates® yarn needle: For weaving in the ends.
Use the specified plush blanket yarn for the intended thick, soft fabric. A different yarn weight can change the blanket’s size, drape, and yarn requirements. If substituting, check the yarn label and make a small gauge swatch before beginning.

Step-by-step instructions
Abbreviations: ch = chain; sc = single crochet; st(s) = stitch(es); RS = right side; rep = repeat.
-
Make the foundation chain: Ch 86.
-
Work the first row (RS): Work 2 sc in the second chain from the hook.
Work 1 sc in each of the next 6 chains, skip 1 chain, work 1 sc in each of the next 6 chains, then work 3 sc in the next chain. Repeat from * to * across the chain. At the end, finish the last repeat with 2 sc in the last chain. Turn. -
Work the second row: Ch 1. Work into the back loop only of each stitch across the row. Work 2 sc in the first sc.
Work 1 sc in each of the next 6 sc, skip the next 2 sc, work 1 sc in each of the next 6 sc, then work 3 sc in the next sc. Repeat from * to * across the row. At the end, finish the last repeat with 2 sc in the last sc. Turn. -
Repeat the ripple row: Continue repeating the second row until the blanket measures 42 in. (106.5 cm) long.
-
Finish: Fasten off. Weave in the yarn ends with the yarn needle.
Ways to use your finished blanket
Drape the blanket over a nursery chair or fold it at the foot of a crib for a soft decorative accent. It also makes a practical handmade baby-shower gift or a cozy layer for stroller outings. For safe sleep, follow current infant sleep guidance: keep loose blankets out of an infant’s sleep space.
How to care for your crochet blanket
Check the yarn label before washing, as care instructions can vary. When machine washing is allowed, use a gentle cycle with cool water and mild detergent. Avoid harsh bleach and high heat, which can damage the plush texture.
Reshape the blanket while damp and lay it flat to dry. Avoid hanging it, since the weight of wet yarn may stretch the ripple shape. Store it clean and fully dry, folded loosely in a cool, dry place.
Tips for success
- Mark the row edges: Place a stitch marker in the first stitch of each row if you tend to lose track of where to work the final stitches.
- Keep the ripple repeat visible: The 3 sc in one stitch form each peak, while the skipped stitches create the valleys. Check these points as you go.
- Count the straight sections: Each side of the valley has 6 sc. Counting them helps prevent extra or missing stitches that can distort the waves.
- Work into the back loops only on row 2 and repeat rows: Picking up both loops by mistake can change the surface texture.
- Watch your tension: Plush yarn can make individual stitches harder to see. Keep your loops even and avoid pulling the yarn too tightly.
- Measure the length relaxed: Lay the blanket flat without stretching it when checking for 42 in. (106.5 cm).
Creative variations
- Choose another color: A different blanket-yarn shade can give the same ripple a new look. Use the stated yardage as your guide, and make sure you have enough yarn in the chosen color.
- Add a contrasting border: A simple border can frame the waves, but it will use extra yarn and may affect the blanket’s finished width and drape. No border is included in the instructions.
- Adjust the size: To change the width, alter the foundation chain only in a way that preserves the ripple repeat. A different starting chain may affect the wave alignment, so check the stitch repeat carefully before committing. Changing the length is simpler: continue or stop repeating the second row at your preferred measurement.
- Make a coordinating set: Use the same yarn color in a matching nursery accessory, checking its pattern for suitable sizing and safe use.

Frequently asked questions
Is this ripple blanket suitable for beginners?
Yes, if you know how to chain and make single crochet stitches. The main challenge is keeping the increases, skipped stitches, and back-loop placement consistent across each row.
How much yarn does the pattern require?
The pattern calls for 2 balls of Bernat® Baby Blanket™ Frosting™, or 440 yds/402 m total, in Cozy Rosie or Seaside.
Can I use a different hook size?
The recommended hook is U.S. L/11 (8 mm), or the size needed to obtain gauge. A smaller or larger hook can change the fabric’s firmness and the finished dimensions, so check your gauge before working the blanket.
How can I make the blanket longer?
Repeat the second row until the blanket reaches your preferred length. The pattern’s specified length is 42 in. (106.5 cm).
How can I make it wider?
The pattern starts with 86 chains. Changing the width means adjusting the foundation chain while preserving the ripple repeat. Test the revised chain and first row to confirm that the peaks and valleys line up before continuing.
Why are my blanket edges uneven?
Check that you work the final 2 sc in the last stitch as instructed and turn after every row. Missing the edge stitch or adding an extra stitch can make the sides grow unevenly.
How should I wash the finished blanket?
Follow the yarn label. If machine washing is allowed, use a gentle cycle with cool water, then reshape and dry the blanket flat to help prevent stretching.
Can I sell blankets made from this pattern?
The pattern instructions provided here do not state whether finished items may be sold. Check the original designer’s usage terms before listing or selling finished blankets.
Print
Baby Ripple Crochet Blanket
Description
A cozy, beginner-friendly blanket with a gently wavy shape, perfect as a baby shower gift or for use in a nursery.
Materials
- Bernat® Baby Blanket™ Frosting™ yarn: Cozy Rosie (61001) or Seaside (61004), 2 balls, or 440 yds/402 m total.
- Crochet hook: U.S. L/11 (8 mm), or the size needed to obtain gauge.
- Susan Bates® yarn needle: For weaving in the ends.
Instructions
- Make the foundation chain: Ch 86.
- Work the first row (RS): Work 2 sc in the second chain from the hook. Work 1 sc in each of the next 6 chains, skip 1 chain, work 1 sc in each of the next 6 chains, then work 3 sc in the next chain. Repeat from * to * across the chain. At the end, finish the last repeat with 2 sc in the last chain. Turn.
- Work the second row: Ch 1. Work into the back loop only of each stitch across the row. Work 2 sc in the first sc. Work 1 sc in each of the next 6 sc, skip the next 2 sc, work 1 sc in each of the next 6 sc, then work 3 sc in the next sc. Repeat from * to * across the row. At the end, finish the last repeat with 2 sc in the last sc. Turn.
- Repeat the ripple row: Continue repeating the second row until the blanket measures 42 in. (106.5 cm) long.
- Finish: Fasten off. Weave in the yarn ends with the yarn needle.
Notes
Use the specified plush blanket yarn for the intended thick, soft fabric. A different yarn weight can change the blanket’s size, drape, and yarn requirements. If substituting, check the yarn label and make a small gauge swatch before beginning.